PPS BZ-A4B1

Alloy polyphentlene sulfide(PPS)

Product features

This kind of product is one of the high performance glass fiber reinforced polyphenylene sulfide(PPS) alloy series products manufactured by our company. It is made by adding PA66, glass fiber and related additives through twin-screw extruder on the basis of PPS resin. By adding PA66, the brittleness of PPS was improved, and the roughness of PPS was increased. Meanwhile, the strength also increases greatly. This kind of product has good mechanical properties, high rigidity, high toughness, high creep resistance, high temperature resistance, chemical corrosion resistance, good electrical insulation properties, arc resistance and other characteristics. It also has good processing performance, suitable for secondary processing, applicable for high rigidity and high toughness requirements for production parts.


Product applications

Because of its outstanding characteristicsit is widely used in aerospace, electronic appliances, machinery, auto railway and other industries. It is used in the production of high performance requirements devices with high rigidity, high toughness, high temperature resistance and insulation. And it can also be applied in making high - strength shell, high - temperature resistance contactor, etc.


Product performance

 

Test Items

 

      Unit 

 

   Performance

 

  Test standard

Density

g/cm3

1.57

GB/T 1033

Molding Shrinkage

%

0.25/0.75

GB/T 15585

Water Absorption

%

0.02

GB/T 2914

Tensile Strength

MPa

150

GB/T 1040

Elongation at break

%

1.8

GB/T 1040

Bending Strength

MPa

230

GB/T 9341

Flexural Modulus

MPa

1.1×104

GB/T 9341

Notched izod impact strength

KJ/m2

15

GB/T 1843

Melting Point

270

GB/T 4608

Heat Distortion Temperature/

HDT(1.8Mpa)


255

GB/T 1634

Volume Resistivity ×1015

Ω.m

5

GB/T 1410

Surface Resistivity ×1014

Ω

5

GB/T 1410

Permittivity 1MHz

/

4

GB/T 1409

Dielectric Strength

KV/mm

16

GB/T 1408

         Flame Retardant

/

V-1

GB/T UL94


Conditions:

1. Material drying process

Temperature: 130 ~ 150 ℃ *4 hours

Note: if any metal insert molding products, need to preheat insert: metal insert preheating temperature: 130 ~ 140 ℃, time: constant temperature for 1 hour

2. Injection molding process

Mold temperature: 120 ~ 150 ℃ (can be set according to the product structure situation)

Cylinder temperature:

The front: 260 ~ 280 ℃

In the middle: 280 ~ 310 ℃

The last period: 280 ~ 310 ℃

Nozzle: 270 ~ 300 ℃

Injection pressure: 80~150MPa (70-95%)

Injection speed: medium speed ~ high speed.

Pressure holding pressure: 30-70MPa (20-45%)

Meter: the residual amount is set 5-10mm.

Loose back: 3-5 mm

Screw rotation speed: 50-120rpm.

Back pressure: 0.2-5MPa.

Injection molding time: according to the size of the parts, when the mold is filled with mold, and the surface is basically cooling is good.

 

3. Post-processing technology: determined by the size of the parts.

Processing temperature: 160 ~ 180 ℃, the processing time: 4 ~ 8 hours

 

 


Scan the QR Code